G80 Chain Installation Requirements
G80 chain can be installed correctly, which is directly related to our lifting work can be carried out smoothly, so today we come to introduce the G80 chain in the installation process which requirements, G80 Chain I hope you can read the user. G80 chain installation requirements
Requirements 1: G80 chain in the installation process must pay attention to the phenomenon can not appear twist, or in the course of the operation may appear card chain phenomenon, G80 Chain which will bring us trouble;
Requirement 2: We should also pay attention to the tightness of the G80 chain in the process of installing the G80 chain to prevent the G80 chain appears too tight or too loose, so that the use of the process prone to problems;
Requirements 3: After we have installed the G80 chain, it should be carefully checked once again to prevent the screws from fixing the G80 chain too loose, so that we may be in the process of the problem may be broken.
G80 chain in the installation process should pay more attention to the above aspects, G80 Chain to prevent accidents in the course of work, so as to bring a threat to our lives.
As the G80 chain with alloy steel material, so the use of strong wear-resistant, but if the operation will still make the G80 chain fracture, this is called strong cracking, the following small series to do a brief introduction to it.
G80 chain of strong cracking and fatigue cracking is not the same concept, strong cracking refers to the G80 chain has been a strong impact, G80 chain was forced to pull off, this G80 chain pull off we can avoid, as long as we use the G80 Chain, the correct operation to ensure that the surrounding environment without work, G80 chain of strong cracking can effectively avoid.
G80 chain of strong cracking is due to operational errors caused by, we should try to avoid, so as to extend the service life of G80 chain. As long as we use the specification, G80 Chain the operation is correct, you can make the G80 chain to play the most "power."
G80 chain for a long time to use, the shape will have some changes, common deformation, distortion, wear and so on, and G80 chain distortion should be dealt with in time to reduce the risk of operation.
Lifting G80 chain distortion often occurs, for the emergence of the distortion of the operation will have an impact on the operation, G80 Chain the user should do a detailed understanding of the work done.
If the degree of distortion is relatively light, then the user can continue to lift work, but to do a good job on the G80 chain inspection work, to understand the degree of development of distortions, if you can not rule out the danger should be strictly prohibited.
80 G80 chain in the use of wear due to failure, G80 Chain which is a very common kind of problem, then the operation can reduce the degree of wear it? In fact, very simple, just two strokes.
The first move; in the use of 80-class lifting G80 chain before the operation, in its surface evenly coated with a thin layer of lubricating oil, and put it aside for some time, after the grease is fully absorbed, and then use, so Can achieve the purpose of reducing the degree of wear.
The second measure: According to the actual needs of the appropriate selection of the G80 chain to do the job, not only that, if the use of the process, there are abnormal operation, G80 Chain please stop the operation, the G80 chain maintenance, so you can reach it The purpose of wear.